Home Easy Hacking Wiki

Building a Hardware Interface

15pages on
this wiki
Add New Page
Talk0 Share

Introduction Edit

In order to be able to control home easy components from your computer, you will need to construct a suitable interface between your computer and the home easy "network". In most cases the easiest way to make the actual connection to the PC is via a microcontroller like the Arduino or BASIC Stamp.

There are a couple of different approaches to this :

Constructing a 433Mhz transmitter / receiver controller Edit

There are a number of suitable transmitter / receiver components available which are relatively straightforward to interface to with a suitable microcontroller.

The following are some examples of doing this :

Modifying existing Home Easy hardware Edit

Another approach (at least for transmitters) is to hook into an existing home easy remote.

The following are some examples of doing this :

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.